cisco交換機設置同步日志本地時間的方法
cisco交換機設置同步日志本地時間的方法
你還在為不知道cisco交換機設置同步日志本地時間的方法而煩惱么?接下來是小編為大家收集的cisco交換機設置同步日志本地時間的方法教程，希望能幫到大家。
cisco交換機設置同步日志本地時間的方法
分類： 系統運維
Core-Switch-1#show clock
Core-Switch-1#show ntp status
Core-Switch-1#conf t
Core-Switch-1(config)# clock timezone GMT +8
Core-Switch-1(config)#service timestamps debug datetime msec localtime show-timezone
Core-Switch-1(config)#service timestamps log datetime msec localtime show-timezone
Core-Switch-1(config)#exit
Core-Switch-1# clock set 13:51:00 Sep 7 2011
或通過NTP服務器時間同步：
Core-Switch-1#ntp server 192.168.0.254 key 8888 注：8888是指ntp服務器的Key值
Core-Switch-1#wr
Core-Switch-1#sh log
默認情況下日志消息不包括日期和時間戳。
service timestamps {debug | log } uptime
service timestamps {debug | log } datetime [mesc] [localtime] [show-timezone] [year]
debug 參數 在調試輸出時包括時間戳
log 參數 在每種日志消息中添加一個時間戳
uptime 在消息中包括路由器開機以來的時間
0w2d: #SYS-5-CONFIG_I : Configured from console by console
0w2d 開機后0周2天
datetime 顯示準確的日期和時間 UTC 格式 標準格式 MM DD HH:MM:SS
datetime后面可以跟一些參數
mesc 消息中包括毫秒信息
localtime 顯示基于本地配置的時區時間
show-timezone 輸出包括時區名稱
year 輸出包括年份信息
未設置時間前：
#sh log
4w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed state to up
4w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed state to down
4w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed state to up
4w1d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to down
4w1d: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to down
4w1d: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to up
4w1d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to up
4w1d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down
4w1d: %LINK-3-UPDOWN: Interface FastEthernet0/3, changed state to down
4w1d: %LINK-3-UPDOWN: Interface FastEthernet0/3, changed state to up
4w1d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up
設置后
#sh log
.Sep 7 05:59:22: %SYS-6-CLOCKUPDATE: System clock has been updated from 13:59:22 BJ Wed Sep 7 2011 to 05:59:22 UTC Wed Sep 7 2011, configured from console by wht on vty2 (172.16.100.10).
.Sep 7 13:59:23: %SYS-6-CLOCKUPDATE: System clock has been updated from 05:59:23 UTC Wed Sep 7 2011 to 13:59:23 GMT Wed Sep 7 2011, configured from console by wht on vty2 (172.16.100.10).
.Sep 7 13:59:24: %SYS-5-CONFIG_I: Configured from console by wht on vty2 (172.16.100.10)
.Sep 7 13:58:00: %SYS-6-CLOCKUPDATE: System clock has been updated from 14:00:05 GMT Wed Sep 7 2011 to 13:58:00 GMT Wed Sep 7 2011, configured from console by wht on vty2 (172.16.100.10).
看了“cisco交換機設置同步日志本地時間的方法”還想看：
2.cisco交換機時間設置時間