linux查看cpu溫度命令

　　我們可能會關心自己的電腦或者服務器CPU的溫度，如何在linux中快速查看CPU溫度呢?下面由學習啦小編為大家整理了linux查看cpu溫度命令的相關知識，希望大家喜歡!

　　Linux查看cpu溫度命令

　　lm_sensors提供了一套方案，可以自動偵測主板傳感器的型號和讀取方式，可以在命令行模式下快速安裝運行。

　　在CentOS系統中安裝使用實例如下：

　　#yum install -y lm_sensors

　　然后運行sensors-detect來探測傳感器類型，此命令會給出一些問題，一律回答Yes即可：

　　[root@vm-36 ~]# sensors-detect

　　Stopping lm_sensors: [FAILED]

　　# sensors-detect revision 1.1

　　# System: Dell Inc. PowerEdge R710

　　# Board: Dell Inc. 0XDX06

　　This program will help you determine which kernel modules you need

　　to load to use lm_sensors most effectively. It is generally safe

　　and recommended to accept the default answers to all questions,

　　unless you know what you're doing.

　　Some south bridges, CPUs or memory controllers contain embedded sensors.

　　Do you want to scan for them? This is totally safe. (YES/no):

　　Silicon Integrated Systems SIS5595... No

　　VIA VT82C686 Integrated Sensors... No

　　VIA VT8231 Integrated Sensors... No

　　AMD K8 thermal sensors... No

　　AMD Family 11h thermal sensors... No

　　Intel digital thermal sensor... Success!

　　(driver `coretemp')

　　Intel AMB FB-DIMM thermal sensor... No

　　VIA C7 thermal and voltage sensors... No

　　Some Super I/O chips contain embedded sensors. We have to write to

　　standard I/O ports to probe them. This is usually safe.

　　Do you want to scan for Super I/O sensors? (YES/no):

　　Probing for Super-I/O at 0x2e/0x2f

　　Trying family `National Semiconductor'... No

　　Trying family `SMSC'... Yes

　　Found `SMSC EMC2700LPC Super IO'

　　(no information available)

　　Probing for Super-I/O at 0x4e/0x4f

　　Trying family `National Semiconductor'... No

　　Trying family `SMSC'... No

　　Trying family `VIA/Winbond/Nuvoton/Fintek'... No

　　Trying family `ITE'... No

　　Some systems (mainly servers) implement IPMI, a set of common interfaces

　　through which system health data may be retrieved, amongst other things.

　　We first try to get the information from SMBIOS. If we don't find it

　　there, we have to read from arbitrary I/O ports to probe for such

　　interfaces. This is normally safe. Do you want to scan for IPMI

　　interfaces? (YES/no):

　　Found `IPMI BMC KCS' at 0xca8... Success!

　　(confidence 8, driver `ipmisensors')

　　Some hardware monitoring chips are accessible through the ISA I/O ports.

　　We have to write to arbitrary I/O ports to probe them. This is usually

　　safe though. Yes, you do have ISA I/O ports even if you do not have any

　　ISA slots! Do you want to scan the ISA I/O ports? (YES/no):

　　Lastly, we can probe the I2C/SMBus adapters for connected hardware

　　monitoring devices. This is the most risky part, and while it works

　　reasonably well on most systems, it has been reported to cause trouble

　　on some systems.

　　Do you want to probe the I2C/SMBus adapters now? (YES/no):

　　Sorry, no supported PCI bus adapters found.

　　Module i2c-dev loaded successfully.

　　Now follows a summary of the probes I have just done.

　　Just press ENTER to continue:

　　Driver `coretemp':

　　* Chip `Intel digital thermal sensor' (confidence: 9)

　　Driver `ipmisensors':

　　* ISA bus, address 0xca8

　　Chip `IPMI BMC KCS' (confidence: 8)

　　Warning: the required module ipmisensors is not currently installed

　　on your system. If it is built into the kernel then it's OK.

　　Otherwise, check http://www.lm-sensors.org/wiki/Devices for

　　driver availability.

　　Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no):

　　Starting lm_sensors: loading module ipmi-si coretemp [ OK ]

　　Unloading i2c-dev... OK

　　最后運行sensors命令來查看CPU溫度

　　[root@vm-36 ~]# sensors

　　coretemp-isa-0000

　　Adapter: ISA adapter

　　Core 0: +44.0°C (high = +85.0°C, crit = +95.0°C)

　　Core 1: +44.0°C (high = +85.0°C, crit = +95.0°C)

　　Core 9: +46.0°C (high = +85.0°C, crit = +95.0°C)

　　Core 10: +48.0°C (high = +85.0°C, crit = +95.0°C)

　　coretemp-isa-0001

　　Adapter: ISA adapter

　　Core 0: +45.0°C (high = +85.0°C, crit = +95.0°C)

　　Core 1: +45.0°C (high = +85.0°C, crit = +95.0°C)

　　Core 9: +49.0°C (high = +85.0°C, crit = +95.0°C)

　　Core 10: +46.0°C (high = +85.0°C, crit = +95.0°C)

　　我們還可以將lm_sensors服務設置為自動啟動，以便自動加載相關模塊：

　　[root@vm-36 ~]# chkconfig lm_sensors on

　　[root@vm-36 ~]# service lm_sensors start

　　Starting lm_sensors: loading module ipmi-si coretemp [ OK ]