国产成人v爽在线免播放观看,日韩欧美色,久久99国产精品久久99软件,亚洲综合色网站,国产欧美日韩中文久久,色99在线,亚洲伦理一区二区

學習啦 > 學習電腦 > 網絡知識 > 路由器 > 路由器設置 > cisco思科 > 思科Eigrp split-horizon丟失路由分析(2)

思科Eigrp split-horizon丟失路由分析(2)

時間: 權威724 分享

思科Eigrp split-horizon丟失路由分析

  查看R2 R3路由表

  R2#sh ip route

  Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

  D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

  N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

  E1 - OSPF external type 1, E2 - OSPF external type 2

  i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

  ia - IS-IS inter area, * - candidate default, U - per-user static route

  o - ODR, P - periodic downloaded static route

  Gateway of last resort is not set

  1.0.0.0/24 is subnetted, 1 subnets

  D 1.1.1.0 [90/2297856] via 11.1.1.1, 00:01:33, Serial0/0 (此時只有R1的路由沒有R3的了)

  2.0.0.0/24 is subnetted, 1 subnets

  C 2.2.2.0 is directly connected, Loopback0

  11.0.0.0/24 is subnetted, 1 subnets

  C 11.1.1.0 is directly connected, Serial0/0

  R3#sh ip route

  Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

  D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

  N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

  E1 - OSPF external type 1, E2 - OSPF external type 2

  i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

  ia - IS-IS inter area, * - candidate default, U - per-user static route

  o - ODR, P - periodic downloaded static route

  Gateway of last resort is not set

  1.0.0.0/24 is subnetted, 1 subnets

  D 1.1.1.0 [90/2297856] via 11.1.1.1, 00:05:01, Serial0/0(同樣也是只有R1的路由沒R2的)

  3.0.0.0/24 is subnetted, 1 subnets

  C 3.3.3.0 is directly connected, Loopback0

  11.0.0.0/24 is subnetted, 1 subnets

  C 11.1.1.0 is directly connected, Serial0/0

  這是我們?cè)诮涌谙玛P(guān)閉EIGRP的水平分割再看

  R1(config)#int s0/0

  R1(config-if)#no ip split-horizon eigrp 100

  查看路由表

  R2#sh ip route

  Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

  D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

  N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

  E1 - OSPF external type 1, E2 - OSPF external type 2

  i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

  ia - IS-IS inter area, * - candidate default, U - per-user static route

  o - ODR, P - periodic downloaded static route

  Gateway of last resort is not set

  1.0.0.0/24 is subnetted, 1 subnets

  D 1.1.1.0 [90/2297856] via 11.1.1.1, 00:00:25, Serial0/0

  2.0.0.0/24 is subnetted, 1 subnets

  C 2.2.2.0 is directly connected, Loopback0

  3.0.0.0/24 is subnetted, 1 subnets

  D 3.3.3.0 [90/2809856] via 11.1.1.1, 00:00:25, Serial0/0(這時,我們看到了R3的路由)

  11.0.0.0/24 is subnetted, 1 subnets

  C 11.1.1.0 is directly connected, Serial0/0

  R3#sh ip route

  Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

  D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

  N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

  E1 - OSPF external type 1, E2 - OSPF external type 2

  i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

  ia - IS-IS inter area, * - candidate default, U - per-user static route

  o - ODR, P - periodic downloaded static route

  Gateway of last resort is not set

  1.0.0.0/24 is subnetted, 1 subnets

  D 1.1.1.0 [90/2297856] via 11.1.1.1, 00:00:20, Serial0/0

  2.0.0.0/24 is subnetted, 1 subnets

  D 2.2.2.0 [90/2809856] via 11.1.1.1, 00:00:20, Serial0/0 (同樣也有了R2的路由)

  3.0.0.0/24 is subnetted, 1 subnets

  C 3.3.3.0 is directly connected, Loopback0

  11.0.0.0/24 is subnetted, 1 subnets

  C 11.1.1.0 is directly connected, Serial0/0

  此時驗證完畢,在幀中繼環境中,rip協議的水平分割是默認關閉的,而eigrp的水平分割是開啟的,需要在接口下手動關閉水平分割,以防出現路由缺失問題。

  看過文章“思科Eigrp split-horizon丟失路由分析”的人還看了:

  1.思科路由器怎么進入 思科路由器怎么設置

  2.思科路由器基本配置教程

  3.cisco思科路由器設置

  4.Cisco(思科)新手之路由器連接

  5.思科路由器控制端口連接圖解

  6.如何查看Cisco路由器的配置信息

  7.教你如何設置Cisco路由器安全

  8.思科路由器如何啟動

  9.思科路由器之基本輸入操作

  10.思科路由器型號有哪些

565032